|
|
- Time-tested, field-proven design with backflush
- Cal gas injection on inlet side of filter
- A simple, easily maintained probe with no welded parts
- Can be built in any machinable material, typically 316L stainless
steel or Hastelloy C-276.
- Insertion tube can be any length and can be field shortened; it threads
into body and is easily replaced
- Designed to mount on 4 inch 150 pound ANSI flange
- Heated filter chamber located outside of flange allows safe, easy
filter change
- Electrical heater standard, or optional steam heater suitable for
Class 1 Division 2 installation
- Filtration 5 to 25 microns with reusable non-reactive filters
- No active components at sample probe location
- No plant utilities required at sample probe location; sample probe
completely supported from analysis enclosure.
- High temperature model also available
|
|